Most of time, some auxiliary equipment are necessary for roll former and sandwich panel line, like hydraulic decoiler (5TONS, 10TONS with a coil car), slitting and cut to length machine line, and a hydraulic curving machine etc.

For example, whenever there is a high speed roll forming machine running on site, a hydraulic decoiler is necessary because manual decoiler pulled by roll former cannot reach the speed and usually no braker will be built on a manual decoiler; another case is on the insulated sandwich panel prdouction line, an auto stacker has to be placed at back because it’s not possible to lift up a finished PU sandwich panel each every time manually; a slitting and cut to length machine line most of time will be required by the manufacturer of stud and track and so on.


10T hydraulic decoiler

Hydraulic Decoiler/Recoiler

A hydraulic decoiler is an equipment for unrolling the steel coils and always works for roll forming machine, sandwich panel production line, slitting and cut to length line, and embossing machine line etc.

Hydraulic Curving Machine

A hydraulic curving machine is necessary to produce crimping curved panels or no-crimp curved corrugated sheets mainly applied as roofing of warehouses, military camps, storages, parking sheds and so on.

Metal Embossing Machine Line

A metal sheet embossing machine line is always required for the production of raised or sunken designs or relief in sheet metal continuously from unrolling or uncoiling, embossing and recoiling.

Sltting and cut to length line

Slitting and Cut to Length Line

Metal sheets or strips suppliers always need slitting and cut to length machine line for the production of metal sheets with different widths or lengths from GI, PPGI, or Stainless coils in large quantities.

Auto Stacker Machine

As a common auxiliary equipment to roll forming line or cut to length line, an auto stacking machine or auto stacker is placed at the end of production lines to stack the final cut sheets automatically.

Metal Bending & Cutting Machine

Roll forming machines are one of the most equipment applied in metal fabrication industry; however, metal sheet bending and cutting machine cannot be replaced for making some kinds of products.