MTC has built a Corrugated roofing roll forming machine for the client from Netherland.  Accordingly, all rolling tools for this machine are as per European standards fine machined.A Corrugated sheet roll forming machine typically produce roof panels or wall siding panels. The raw materials are usually 0.3-0.8mm thick colour steel and galvanised steel. However, this European quality corrugated roofing roll forming machine makes something more.

According to client’s requests, there will be extra raw material s, i.e. 0.3-0.6mm Alu-zinc steel and 0.5-0.9mm Aluminum. The materials used would require absolutely hard and smooth rolling tools. In order to build a European quality machine, MTC improves the apperance of the corrugated sheet roll forming machine as well, making spacers fine machining and chrome coating.

corrugated roofing sheet roll forming machine

Brief Introduction of Corrugated Roofing Roll forming Machine:

A regular corrugated roofing roll forming machine handles with metal materials covering 914-1250mm width, and so does this machine. This corrugated roofing roll forming machine produces sheets with 838mm covering width from 1000mm wide material.

Most of clients prefer a regular corrugated sheet machine because it’s for producing roof panels, which are insalled on the exterior roof top of a building. Therefore, the length accuracy and edge bending are not as important as some high-accuracy parts. In addition, a regular corrugated sheet roll forming machine is relatively more economical.

However, it doesn’t mean that a high-accuracy corrugated sheet roll forming machine is not necessary. In some area, specifically in Europe and North America, people tend to install Aluminum corrugated sheets on interior roof tops for decoration purpose. In this case, all details of the sheets are nothing but important, which require high-quality components of the machine.

Generally, the main components of a this corrugated roofing roll forming machine are listed as below:

  • Hydraulic decoiler
  • Feeding guide
  • Roll former
  • Hydraulic system
  • Control system
  • Hydraulic cutter
  • Runout tables

Basic Specifications for this Corrugated Roofing Roll Forming Machine:

corrugated roofing roll forming machinehigh-quality corrugated sheet roll forming machine
  • Raw Material: PPGI, GI,GA, Aluminum
  • Material Thickness: 0.3-0.8mm;
  • Material Width: 1000mm;
  • Total Power: 19 KW;
  • Forming stations: 18 stations;
  • Material of Roller: High grade 45# steel, Polished and coated with 0.05mm hard chrome .
  • Shaft Material: High grade 45# steel
  • Diameter of shafts: 70mm
  • Hydraulic Cutter: Stop to cut
  • Material of cutting dies: Cr12 steel
  • Cutting lengths and quantities: Clients can set required lengths and quantities through the touch screen on PLC control box.
  • Control system: Siemens PLC, Inverter, CHNT transformer and Omron encoder

This site uses Akismet to reduce spam. Learn how your comment data is processed.