An IBR roof sheet roll forming machine is always required by African clients who produces metal roofing sheets with effective width 686mm or 890mm from Galvanized steel and the sheets are largely used in African markets.

IBR, abbreviated from “Inverted Box Rib”, usualy designed for the outside cladding or roofing materials in commercial, industrial and residential buildings, and the raw material is mostly Galvanized steel with the thickness from 0.5mm-0.8mm, and the width 925mm and 1219mm.

Like other roof panel roll forming machine,  IBR roofing sheet roll forming machine is also controlled by the advanced PLC control system & Omron encoder and able to run both automatically and manually.

ibr roof sheet roll forming machine
686 IBR Sheet Roll Forming Machine

IBR Roof Sheet Roll Forming Machine Features:

1) IBR roofing roll forming machine is a common roof sheet roll forming machine, but the finished products are used mainly in South African market.
2) There are two standard IBR sheet profiles with 686mm and 890mm effective widths made by this roof panel roll forming machine, and the raw materials would be 925mm and 1219mm width galvanized steel coils with 0.4-0.6mm material thickness;
3) There are two forming stands structure for IBR sheet roll forming machine, i.e. separate forming stands structure and conjoint forming stands structure;

General Introduction of the ibr roofing panel roll forming machine:

ibr roof sheet roll forming machine
  • Material width 925mm (1219mm)
  • The effective width 686mm (890mm)
  • The thickness of Coil 0.5—0.8mm
  • Application galvanized roofing sheets
  • The overall dimensions 8600mmX1500mmX1300mm
  • Total weight Appro.6.2 T
  • Main Power 5.5 KW

The main parts of the ibr roof panel roll forming machine:
Manual Uncoiler; Feeding Guider; Roll forming machine; Hydraulic Cutting system; PLC Control System; Runout Table

  • Uncoiler: Manual Uncoiler
  • Inner diameter 508mm
  • Outer diameter 1250mm.
  • Loading weight 5T
  • Forming speed 8—12m/min.
  • Forming steps 16 stations
  • Material of Shafts 45# high-quality steel
  • Diameter of Shafts 70mm
  • Material of Roller high quality 45#steel coated with hard chrome 0.05mm.
  • Thickness of Siding Plate 18mm
  • Transmission by chain-brackets
  • Motor Power 5.5 KW
  • Material of cutting blade Cr12 with quenched treatment 60-62
  • Hydraulic Power 4 KW
  • This machine will automatically measure and cut the length and quantity as per clients set on the PLC touch screen.
  • Control System of ibr sheet roll forming machine
  • Panasonic PLC Control system,touch screen, frequency converter
  • Voltage 380V/50HZ/3phase
IBR Roof Sheet Roll Forming Machine was last modified: February 22nd, 2023 by MAXON®