C Stud Roll Forming Machine Completed
MTC is happy to announce the C stud roll forming machine for American client is now ready for shipping. This C stud roll forming machine produces both C stud and U track from 18-24 gauge galvanised steel.
As a professional manufacturer of customised roll formers, MTC builds this C stud roll forming machine completely as per client’s requirement. The C studs made by this machine will work as a part of wall sandwich panels. In addition, the studs can also work as a part of steel frame for light steel buildings.
As for this roll former, it’s technically capable to produce both C stud and U track, although the client doesn’t need the U track. That’s why sometimes we call it STUD AND TRACK ROLL FORMING MACHINE as well.
Considering the safety regulations in USA, MTC uses UL approved motor for this C stud roll forming machine. Besides, MTC provides safety cover outside the rolling tools to ensure safe operation. Apart from the safety over and motor, individual stands with chrome coating treatment are applied for high accuracy. And also, this design would ensure the roll former to be good looking and easy to install.
This c stud roll former roll forms 18-24 gauge galvanised steel easily. Regarding operating this machine, it’s just a number-input job, with the help of a PLC computer control box. Firstly, getting all electrical cables and wires connected correctly. And then turning on the control box and select right lauguage. After that, just inputing required lengths and quanitites, and switching to automatic produciton.
It’s important to know that Chinese electrical standard is different from North American, and that’s when you need a Transformer.
Main Components of This C Stud Roll Forming Machine:
- Manual Decoiler
- Feeding Unit
- Main Roll Former
- Straightening Unit
- Cutting Unit
- Hydraulic Station
- Control Unit
- Exit Table
Basic Specifications of C Stud Roll Forming Machine:
- Decoiler: Manual Decoiler
- Capacity Of Decoiler: 1 Tons
- Raw Material: Galvanised steel
- Material Thickness:0.6-1.2mm
- Shaft Diameter:70mm
- Roll Stations:13 stations
- Main Power: 7.5KW
- Cutting type: Hydraulic cutting
- Hydrauli power: 3KW
- Material of cutting blade: Cr12 steel
- Control System:Panasonic PLC, Yaskawa Inverter, Omron Encoder
- Electricity Input: 380V/3 Phase/50Hz
1 people reacted on this
[…] Two months ago, a client from Arizona in USA ordered this steel stud roll forming machine. Accordingly, it’s ready for shipping punctually. See the specifications at C stud roll forming machine. […]