MAXON® just completed the production of a full automatic metal roofing roll forming machine that is shceduled for shipping to Algeria in the end of July.

Metal roofing roll forming machineBriefly, this roll forming machine can easily make metal roof panels in required lengths and quantities. By the help of PLC control system, users just input sheet lengths, quantities, and set the machine under AUTO status, that’s it.

In addition, the roll forming machine manufactures metal roof panels or roofing sheets from galvanized steel or prepainted steel of 1250mm width and 0.3-0.8mm thickness.

Introduction of Metal Roofing Roll Forming Machine:

Generally, this metal roofing roll forming machine consists of same components as other roof panel machine does, like the following:

Metal Roofing Roll Forming MachineThe machine has the same design as trapezoidal sheet roll forming machine and IBR sheet roll forming machine. There are so many different roofing profiles, but the designs of the roll forming equipment  always look alike. This includes the components, function, transmission, features and structures and so on.

Compared to a regular roof sheet roll former, this metal roofing roll forming machine has the PLC control cabinet fixed to its body. The application of this design saves both time for wire connection and space for a separate control cabinet.

Technical Specifications of Metal Roofing Roll Forming Machine:

Generally speaking, this machine has similar technical specifications as other metal sheet roll forming machine as following:

  • Uncoiler: Manual Uncoiler
  • Inner diameter: 508mm
  • Outer diameter: 1250mm.
  • Loading weight: 5TONs
  • Material width: 1250mm
  • Material thickness: 0.3-0.8mm
  • Forming speed: 0—12m/min.
  • Forming stations: 16 stations
  • Material of Shafts: 45# high-quality steel
  • Diameter of Shafts: 70mm
  • Material of Roller: high quality 45#steel coated with hard chrome 0.05mm.
  • Thickness of Siding Plate: 18mm
  • Transmission type: Chains-Sprockets
  • Motor Power: 5.5 KW
  • Material of cutting blade: Cr12 with quenched treatment 60-62
  • Hydraulic Power: 4 KW
  • Control system: Panasonic PLC,touch screen, Invertor, Omron encoder
  • Electricity stanadard: 380V/50HZ/3phase